Defining recording parameters – Interlogix TruVision IP Open Standards Outdoor Cameras Configuration Manual User Manual
Page 17

1BChapter 2: Camera operation
TruVision IP Camera Configuration Manual
15
To set up the Email parameters:
1. In the Network folder, click the
subfolder to open its window.
2. Configure the following settings:
Sender: The name of the email sender.
Sender’s Address: The email address of the sender.
SMTP Server: The SMTP Server IP address or host name.
SMTP Port: The SMTP port. The default is 25.
Enable SSL: Check the checkbox to enable SSL if it is required by the SMTP
server.
Attached Image: Check the checkbox of
Attached Image
if you want to
send emails with attached alarm images.
Interval: This is the time between two actions of sending attached images.
Authentication: If your email server requires authentication, check this
checkbox to use authentication to log in to this server. Enter the login user
name and password.
Receiver: The name of the user to be notified.
Receiver’s Address: The email address of user to be notified.
3. Click
Save
to save changes.
Defining recording parameters
You can adjust the video and audio recording parameters to obtain the picture
quality and file size best suited to your needs. Figure 6 and Table 5 below list the
video and audio recording options you can configure for the camera.