Reboot camera – Interlogix TruVision IP Camera Configuration Manual User Manual

Page 44

3BChapter 4: Camera management

TruVision IP Camera Configuration Manual

3. In the

Maintenance

tab, click the Browse button to locate the firmware file on

your computer.

Note: Please select utc_amb_ipc.dav for product models listed in Chapter 1
on page 1, and utc_365_ipc.dav for TruVision IP open standard cameras.

4. Click

Update

. You will receive a prompt asking you to reboot the camera.

5. The upgrading process will take several minutes. When the upgrade is

finished, the device will reboot automatically.

6. After the device has rebooted, close the browser and login again.

To upgrade firmware version 5.0.x to latest version:

1. Download on to your computer the latest firmware from our web site at:

www.interlogix.com/video/product/truvision-ip-open-standards-outdoor-
cameras/

- Or -

www.utcfssecurityproductspages.eu/videoupgrades/

2. When the firmware file is downloaded to your computer, extract the file to the

desired destination.

Note: Do not save the file on your desktop.

3. In the

Configuration

folder, select the

System

tab.

4. In the

Maintenance

tab, select the

Firmware

Firmware Directory

option.

Then click the Browse button to locate latest firmware file on your computer.

• Firmware directory – Locate the upgrading folder of Firmware files. The

camera will choose the corresponding firmware file automatically.

• Firmware – Locate the firmware file manually for the camera.

Note: Please select utc_amb_ipc.dav for product models listed in Chapter 1
on page 1, and utc_365_ipc.dav for TruVision IP open standard cameras.

5. Click

Update

. You will receive a prompt asking you to reboot the camera.

6. When the upgrade is finished, the device will reboot automatically. The

browser will also be refreshed.

Reboot camera

The camera can be easily rebooted remotely.

To reboot the camera through the web browser:

1. In the

Configuration

folder select the

System

tab.

2. Select the

Maintenance

tab.

3. Click the

Reboot

button to reboot the device.

4. Click

in the pop-up message box to confirm reboot operation.