Interlogix TruVision IP Camera Configuration Manual - Manual (Page 16)

2BChapter 3: Camera configuration
12 TruVision IP Camera Configuration Manual
System time
NTP (Network Time Protocol) is a protocol for synchronizing the clocks of
network devices, such as IP cameras and computers. Connecting network
devices to a dedicated NTP time server ensures that they are all synchronized.
To define the system time and date:
1. In the System folder, click the Time Settings tab to open its window.
2. From the Time Zone drop-down menu, select the time zone that is the
closest to the camera’s location.
3. Under Time Sync , check one of the options for setting the time and date:
Synchronize with an NTP server: Check the NTP enable box and enter the
server NTP address. The time interval can be set from 1 to 10080 minutes.
- Or -
Set manually: Enable the Manual Time Sync function and then click to
set the system time from the pop-up calendar.
Note: You can also check the Sync with computer time checkbox to
synchronize the time of the camera with the time of your computer.
4. Check Enable DST to enable the DST function, and set the date of the DST
period.
5. Click Save to save changes.