Interlogix Simon XT Installation Manual - Manual (Page 41)

Simon XT Installation Manual 35
MM = month
DD = day
To set the date:
1. Scroll until the display shows Set Date, and then press OK.
The display shows Enter Code.
2. Enter your code with the numeric keys, and then press OK.
The display shows the date.
3. Press OK.
The display flashes the year.
4. Scroll to set the year, and then press OK to accept the setting.
The display flashes the month.
5. Scroll to set the month, and then press OK to accept the setting.
The display flashes the day.
6. Scroll to set the day, and then press OK to accept the setting.
The display shows the programmed date.
7. Press Status twice to exit.
Revision
To display the firmware revision of the system, scroll until the display shows
Revision. This is a read-only menu. Press Status to exit.
Contrast
To adjust the contrast of the display:
1. Scroll until the display shows Contrast, and then press OK.
2. Scroll to increase or decrease the contrast setting,
3. Press Status to save the setting and exit.
Note: Changes in contrast are more noticeable when not looking at the display
straight on.