Interlogix Simon XT Installation Manual - Manual (Page 28)

22 Simon XT Installation Manual
Figure 4: Panel mounting hole locations
5. Connect the chassis assembly to the mounted back piece and let it hang
down. This makes the terminal strip accessible for wiring various hardwired
components to the panel.
6. Feed wires through openings in the back piece to be ready to attach them to
the screw terminals or the phone connectors.
7. Install all screws and tighten gently.
Connecting hardwired devices
The panel has seven screw terminals and two telephone connections (Figure 5
on page 23). The screw terminals connect AC power, sirens, and/or hardwired
detectors.
Program sensors and devices before you install them. Follow the instructions in
to add the sensors to panel memory.