How to use osd menu – IC Realtime 22X Optical / 10X Digital Zoom High Res Day/Night Speed Dome-24VAC (ICR2200DN) User Manual
Page 36
Speed Dome Camera Instruction Manual
36/47
PRESET Setup
PRESET SETUP
------------------------
PRESET NO. 1
CLR PRESET CANCEL
CAM ADJUST GLOBAL
BACK
EXIT
z
Preset Number
[1~128]
If a selected preset is already defined, camera
moves to pre-defined position and preset
characteristics such as Label and Relay Outputs
show on monitor. If a selected preset is not
defined, “UNDEFINED” shows on monitor.
z
Clear Preset
[CANCEL/OK]
Delete current Preset data
z
Edit Preset Scene Redefine current Preset scene position (i.e. PTZ).
z
Edit Preset Label
Edits Label to show on monitor when preset runs.
MAX. 10 alphabets are allowed.
z
Edit Relay Out
Define Relay output. If an Output point is ON
state it will show a number corresponding to
each point. Otherwise, '-' will be displayed.
z
CAM Adjust
[GLOBAL/LOCAL]
WB(White Balance) and AE(Auto Exposure) can
be set up independently for each preset. There
are 2 modes, "Global" mode & "Local" mode. The
Global mode means that WB or AE can be set up
totally and simultaneously for all presets in
"ZOOM CAMERA SETUP" menu.
The Local mode means that WB or AE can be set
up independently or separately for each preset
in each preset setup menu. Each Local WB/AE
value should activate correspondingly when
camera arrives at each preset location. During
jog operation, Global WB/AE value should be
applied.
All Local WB/AE value should not change
although Global WB/AE value changes. If “Local’’
is selected, Menu to set WB/AE shows on
monitor.
HOW TO USE OSD MENU
4