IC Realtime 22X Optical / 10X Digital Zoom High Res Day/Night Speed Dome-24VAC (ICR2200DN) - Manual (Page 22)

Speed Dome Camera Instruction Manual 22/47
OSD Display of Main Screen
P/T/Z Information
Camera ID
Alarm Information
Action Title Preset Label LABEL12345 PRESET1
I:1--- O:-2
CAM 1 15/4/x1/N
z P/T/Z Information Current Pan/Tilt angle in degree, zoom magnification and a compass direction.
z Camera ID Current Camera ID(Address).
Followings are possible Action Titles and their meaning.
"SET PRESET ×××" When Preset ××× is stored
"PRESET ×××" When camera reach to Preset ×××
"PATTERN ×" When Pattern × is in action
"SWG×/PRESET ×××" When Swing × is in action
z Action Title
"UNDEFINED" When undefined function is called to run
z Preset Label The Label stored for specific Preset.
z Alarm Information This information shows current state of Alarm I/O. The character ‘O’ of first line stands
for Output and ‘I’ of second line means Input. If an I/O point is ON state it will show a
number corresponding to each point. If an I/O point is OFF state, '-' will be displayed.
Ex) Point 2 & 3 of inputs are ON and Point 1 of outputs is ON, OSD will show as below
I:-23- O:1-
OPERATION 3