IC Realtime 22X Optical / 10X Digital Zoom High Res Day/Night Speed Dome-24VAC (ICR2200DN) - Manual (Page 32)

Speed Dome Camera Instruction Manual 32/47
CAMERA SETUP (×26 Model)
ZOOM CAMERA SETUP
------------------------
FOCUS MODE SEMIAUTO
DIGITAL ZOOM ON
FLICKERLESS OFF
COLOR ON
LINE LOCK OFF
BACK
EXIT
Setup the general functions of zoom camera module.
z Focus Mode [AUTO/MANUAL/SEMIAUTO]
Sets camera focus mode.
{ SEMIAUTO Mode
This mode exchanges focus mode automatically
between Manual Focus mode and Auto Focus mode.
Manual Focus mode activates in preset operation
and Auto Focus mode activates when jog operation
starts.
With Manual mode at presets, Focus data is
memorized in each preset in advance and camera
calls focus data in correspondence with presets as
soon as camera arrives at a preset.
z Digital Zoom [ON/OFF]
Sets digital zoom function to ON/OFF. If this is set to
OFF, optical zoom function runs but zoom function
stops at the end of optical zoom magnification.
z Flickerless [ON/OFF]
If NTSC type camera is used in 50HZ frequency
circumstance or if PAL type camera is used in 60HZ
frequency circumstance, there should be flicker
(image vibration) on monitor since power
frequency is different from vertical sync
frequency of camera. In these cases, set Flickerless
mode to ON to prevent flicker.
z Color [ON/OFF]
z Line Lock [ON/OFF]
If Line lock sync is ON, video signal is synchronized
with AC power. When this is set to ON, camera asks
if images show properly or not. Check if image is
displayed properly before setting up this.
HOW TO USE OSD MENU 4