IC Realtime 22X Optical / 10X Digital Zoom High Res Day/Night Speed Dome-24VAC (ICR2200DN) - Manual (Page 26)

Speed Dome Camera Instruction Manual 26/47
CAMERA SETUP (×22 Model)
ZOOM CAMERA SETUP
------------------------
FOCUS MODE SEMIAUTO
MAX ZOOM x220
FLICKERLESS OFF
COLOR ON
LINE LOCK OFF
BACK
EXIT
Setup the general functions of zoom camera module.
z Focus Mode [AUTO/MANUAL/SEMIAUTO]
Sets camera focus mode.
{ SEMIAUTO Mode
This mode exchanges focus mode automatically
between Manual Focus mode and Auto Focus mode.
Manual Focus mode activates in preset operation
and Auto Focus mode activates when jog operation
starts.
With Manual mode at presets, Focus data is
memorized in each preset in advance and camera
calls focus data in correspondence with presets as
soon as camera arrives at a preset.
z Max Zoom [Ч2~Ч220]
Sets maximum zoom magnification.
z Flickerless [ON/OFF]
If NTSC type camera is used in 50HZ frequency
circumstance or if PAL type camera is used in 60HZ
frequency circumstance, there should be flicker
(image vibration) on monitor since power frequency
is different from vertical sync frequency of camera.
In these cases, set Flickerless mode to ON to
prevent flicker.
If Flickerless mode is set to ON, Day/Night mode
changes to “Day” and Digital Slow Shutter mode
changes to “OFF” automatically.
z Color [ON/OFF]
z Line Lock [ON/OFF]
If Line lock sync is ON, video signal is synchronized
with AC power. Video can be fluctuated after setting
is changed.
HOW TO USE OSD MENU
4