5 printing data-logs – Haltech F10 User Manual
Page 64
59
11.1.5 Printing Data-logs
You can print Data-logs to a “.txt” file or any ASCII parallel printer, such as IBM compatible
dot matrix printers.
To print a Data-log, press
3
3
3
3
in the Data-log sub-menu or data-log page.
The software will prompt the user whether the data-log should be printed to the printer or to a
text file. Press
)
)
)
)
to print to a file, or
3
3
3
3
to print to a printer. The software is designed to print
to a dot matrix printer. If a dot matrix printer is not available, print the Data-log to a file and
then print the file from DOS or from a word processor / editor. The text file can be loaded
into a spreadsheet.
The information in the Data-log is divided into pages of data. The total number of pages in the
current Data-log is displayed. The software will ask for the numbers of the first and last pages
you want to print. If you want to print the entire Data-log, enter 1 for the first page, and the
number displayed as the last page.
The system pauses to allow the user to set up the printer. To abort printing, press
}
}
}
}
. To re-
enter the start and end page numbers press
5
5
5
5
, any other key begins the printing. Before
printing commences, the printer must be ONLINE and have power and paper. T abort
printing once it has started, press
}
}
}
}
.