Haltech f10 specifications – Haltech F10 User Manual
Page 11
6
HALTECH F10 SPECIFICATIONS
Engine Suitability
•
Up to 16,000 rpm
•
1, 2, 3, 4, 5, 6, 8, 10, 12 cylinders (1-2 rotors)
•
2 or 4 stroke
•
Normally aspirated or supercharged up to 200 kPa (30psi) - Higher boost pressure MAP sensors
available by special arrangem ent
•
Load sensing by throttle position or manifold pressure
•
Multipoint, batch-fire or staged
Power Requirements
••••
Power Source
8.6 to 16 Volts DC
••••
Consumption
Haltech ECU: 270 mA at 12 Volts
Injector Load:Dependent on injector type
approx. proportional to injector duty cycle
(typically 0.6 Amps per injector)
Physical Specifications
•
ECU Dimensions
Length:
140 mm (5 17/32")
Width:
145
mm
(5
5/8")
Depth:
41 mm (1 5/8")
•
Weight
ECU:
615g
(1.35
lb)
Loom:
1.92kg
(4.2
lb)
Sensors:
500g(1.1
lb)
Shipping Weight:
4.5kg (9.9 lb)
(Including
manual/packaging)
Input Sensors
•
Manifold Absolute Pressure (MAP) Sensor (supplied at extra cost)
1 Bar -100kPa to 0kPa
(Naturally Aspirated)
2 Bar -100kPa to 100kPa
(up to 1 Bar or 15 psi boost)
3 Bar -100kPa to 200kPa
(up to 2 Bar or 30 psi boost)
Higher boost pressure MAP sensors available by special arrangement
•
Temperature Sensors (Air and Coolant)
NTC temperature dependent resistor type.
Operating Range
Continuous
-40°C to 100°C (-40°F to 212°F)
Intermittent
up
to
125°C
(257°F)