GTCO SummaSketch FX - Users Guide - Manual (Page 16)

SummaSketch FX 16
NOTE: Refer to Appendix D for TABLET.COM button mapping, tracking and memory
location options.
Examples
For a SummaSketch FX Professional with a four-button cursor connected for COM 2, type:
TABLET /2/C4.
Sample Batch File
TABLET /2/C4
DOSSHELL
Installs driver
Runs the DOSSHELL environment
Running the Driver from CONFIG.SYS
Another way to install the driver is by including TABLET.SYS as a device driver in the
CONFIG.SYS file. In doing so, the system automatically installs the driver each time you
boot or turn on the system.
Line Syntax
DEVICE = TABLET.SYS [COM port] [transducer] [tracking] [other options]
Please note that the command options are the same as those for running TABLET.COM
from the DOS prompt or a batch file. Most of the command line arguments described for
TABLET.COM also works for TABLET.SYS. The exceptions are the /OFF command and the
memory location options /U, /E and /HI.
Example
For a SummaSketch FX with a four-button cursor connected to COM 1:
DEVICE = TABLET.SYS /1/C4