GTCO SummaSketch FX - Users Guide - Manual (Page 14)

SummaSketch FX 14
6. Enter the appropriate number of buttons on your pointing device (stylus or cursor)
and select ENTER.
7. You are now asked to choose the serial port to which your tablet is connected. Type
COM1 or COM2 and press ENTER.
8. The configuration is now complete and you are now ready to use the
Summagraphics tablet with AutoCAD. Exit to the drawing editor and enter Y to save
changes.
Installing the Real Mode Driver (For All Versions of AutoCAD)
Copy the file DGMG.COM from the Drivers/Utilities disk to the hard drive and run the driver
before starting Autodesk applications.
Command Syntax: DGMG [COM port] [transducer]
Examples
For a SummaSketch FX Professional with a four-button cursor connected for COM 2, type:
DGSUMMA/2/C4.
Sample Batch File
DGSUMMA/2/C4
CD/ACAD
ACAD
Installs driver
Changes to the application directory ACAD
Runs application ACAD