Great Planes Tracer 46 Kit - GPMA0400 - Manual (Page 4)

❏
Propeller (Top Flite Power Point ® ); Refer to your engine's
instructions for proper size
❏
Top Flite Super MonoKote ® Covering (Approximately 2
rolls) – See Covering (page 36)
❏
Fuel-Proof Paint – See Painting (page 36)
❏
3' Medium Fuel Tubing (GPMQ4131)
❏
1/4" Latex Foam Rubber Padding (HCAQ1000)
❏
10 oz. Fuel Tank (GPMQ4104)
❏
Two 2" Wheels (GPMQ4221) (2-1/2" wheels desirable
for grass fields)
❏
2-1/4" White Spinner (GPMQ4515)
❏
Great Planes Easy Fueler ™ Fueling System (GPMQ4160)
❏
3/4" Tailwheel (GPMQ4240)
These are the building tools, glue, etc. that we recommend
and mention in the manual.
We recommended Great Planes Pro ™ CA and Epoxy
❏
1 oz. Thick CA- (GPMR6014)
❏
2 oz. Thin CA (GPMR6003)
❏
2 oz. Medium CA+ (GPMR6009)
❏
CA Accelerator (GPMR6035)
❏
6-Minute Pro Epoxy (GPMR6045)
❏
30-Minute Pro Epoxy (GPMR6047)
❏
Pacer Formula 560 Canopy Glue (PAAR3300)
❏
#1 Hobby Knife Handle (HCAR0105)
❏
#11 Blades (HCAR0311, 100 Qty.)
❏
HobbyLite Filler (HCAR3401)
❏
X-Acto Razor Saw (XACR2531)
❏
Hobbico Builder's Triangle Set (HCAR0480)
❏
Small T-Pins (HCAR5100)
❏
Medium T-Pins (HCAR5150)
❏
Great Planes Plans Protector (GPMR6167)
❏
Masking Tape
❏
1/4-20 Tap (GPMR8105, drill bit included)
❏
Great Planes Dead Center ™ Engine Mount Hole Locator
(GPMR8130)
❏
Electric Power Drill
❏
Drill Bits: 1/16", 5/64", 3/32", 7/64", 1/8", 5/32", #18 or
11/64", 3/16", #10 or 13/64" (unless purchased with 1/4-
20 Tap listed above), 1/4", 17/64"
❏
String (for aligning wing and stabilizer)
❏
Screwdrivers (Phillips and Flat Blade)
❏
Sealing Iron (TOPR2100)
❏
CG Machine ™ (GPMR2400)
❏
AccuThrow ™ Deflection Meter (GPMR2405)
❏
Bar Sander or Sanding Block and Sandpaper (coarse,
medium, fine grit)
Made of durable, lightweight aluminum, Easy-Touch ™
Sanders have a uniquely contoured handle that lets you
work longer with less fatigue! The incredibly flat sanding
surface removes high spots with ease. The 5.5" Hand
Sander is ideal for small parts and tight spaces. Use the
11" - 44" Bar Sanders for larger areas. Take the guesswork
out of sanding cur ved or angled shapes with the
Easy-Touch Multi-Sander. Available in 11" and 22" lengths.
Easy-Touch adhesive-backed sandpaper is already
trimmed to these tools’ width...just cut it to length and
press in place. Available in 4 different grits.
GPMR6169 Easy-Touch Hand Sander-5.5"
GPMR6170 Easy-Touch Bar Sander-11"
GPMR6172 Easy-Touch Bar Sander-22"
GPMR6174 Easy-Touch Bar Sander-33"
GPMR6176 Easy-Touch Bar Sander-44"
GPMR6190 Easy Touch Multi-Sander-11"
GPMR6191 Easy Touch Multi-Sander-22"
GPMR6180 Easy-Touch 80-Grit Sandpaper-12' roll
GPMR6183 Easy-Touch 150-Grit Sandpaper-12' roll
GPMR6184 Easy-Touch 180-Grit Sandpaper-12' roll
GPMR6185 Easy-Touch 220-Grit Sandpaper-12' roll
❏
CA Applicator Tips (HCAR3780)
❏
Epoxy Brushes (GPMR8060)
❏
Epoxy Mixing Sticks (GPMR8055, Qty. 50)
❏
CA Debonder (GPMR6039)
❏
Clevis Installation Tool (GPMR8030)
❏
Hot Sock (TOPR2175)
❏
Trim Seal Tool (TOPR2200)
❏
Heat Gun (TOPR2000)
❏
Single Edge Razor Blades (HCAR0312, 100 Qty.)
❏
Razor Plane (MASR1510)
❏
36" Non-Slip Straightedge (HCAR0475)
❏
Denatured or Isopropyl Alcohol (for epoxy clean-up)
❏
Dremel ® Moto-Tool ® or Similar w/Sanding Drum, Cutting
Burr, Cut-off Wheel
❏
Curved-Tip Canopy Scissors (HCAR0667)
❏
Servo Horn Drill (HCAR0698)
Part Numbers for Other Tools or
Accessories You May Require
Suggested Building
Supplies and Tools
4