Galaxy Audio DS-EQ230 - Manual (Page 9)

Ramps on changes: this page allows you to activate or de-activate Fading-in and Fading-out
ramps on the input/output volumes when any parameter changes:
When connected to the DS-EQ230 by the PC remote control software, it is possible to request
sudden parameter changes where the difference between the old parameter and the new one
Can cause unwanted “click” noises (big differences in volume changes) or “bumps” (big
differences in Hp/lp filters cutting frequency values) as the DSP reconfigures.
The Fading-In and Fading-Out ramps eliminate any potential clicks and bumps.
This function can be de-activated when the unit needs to be used in “live” conditions and small
parameter adjustments are requested “on the fly” during live performance.
The following screen shows the Fading ramps function is Off, and therefore de-activated:
Software Version: this page allows you to confirm the Software Version running on the
DS-EQ230:
DPA-240A
1x2 WAY X-OVER
Ramps on Changes
DPA-240A
1x2 WAY X-OVER
SYSTEM UTILITY
- Ramps on Changes -
SYSTEM UTILITY
- Software Version -
DPA-240A
1x2 WAY X-OVER
Ramps on changes
Ramp : Off *
Program Utilities Sub-menu - this sub-menu allows you to access several options related to
the DS-EQ230 operating mode and to manage the presets stored and recallable within the Unit:
DPA-240A
1x2 WAY X-OVER
UTILITY MENU
- Program Utilities -
8