Galaxy Audio DS-EQ230 User Manual
Page 16
User Password: from the “User Password” sub-menu:
Press “ENTER” to access the “User Password” page:
Using the “PM2” or “PM3” encoders to choose a character and the “NAV/PM1” encoder to move
between available locations you can enter a 6 Character Password Name.
The current position of the cursor for the characters to be entered is shown by a “blinking
underscore”.
During this editing phase, the display is as follows if we were using “DSPOT1” as the password:
The DS-EQ230 will exit the “Unit Lock” sub-menu and jump to the “User Password” sub-menu page
screen.
If the password entered in the “Confirm Password” page matches the one entered in the
“Enter Password” page, the following screen will appear:
The Password is now configured and held in the device’s memory.
The user can now decide to “lock” the DS-EQ230 by Password, inhibiting the access to ALL
Equalizer’s functions depending on the setting of the parameter “Password Enable/Disable”,
explained in the following paragraph.
DPA-240A
1x2 WAY X-OVER
User Password
[ ]
User Password
[DSPOT1]
DPA-240A
1x2 WAY X-OVER
Confirm Password
[DSPOT1]
DPA-240A
1x2 WAY X-OVER
DPA-240A
1x2 WAY X-OVER
SECURITY UTILITY
- User Password -
DPA-240A
1x2 WAY X-OVER
DPA-240A
1x2 WAY X-OVER
SECURITY UTILITY
- Insert Password -
15