Canon 50 - Manual (Page 39)

39
B
a
sic Functions
Playback
E
Playback Playing Back a Tape
1. Set the camcorder to PLAY (VCR)
mode.
Set the POWER switch to PLAY (VCR)
and the TAPE/CARD switch to
.
2. Press the button to rewind
the tape.
3. Press the / button to begin
playback.
4. Press the button to stop
playback.
 To use the viewfinder, close the LCD panel.
 About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
 You can display the audio level indicator ( 78).
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
Cassette or a commercially available digital video head-cleaning cassette (
148).