Canon 50 - Manual (Page 114)

114
Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the built-in or an external
microphone (MIC. IN).
This function is operated with the wireless controller.
Connecting
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Connecting a Microphone
See Recording with an External Microphone ( 56).
Dubbing
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Press the MENU button and select [AUDIO SETUP]. Select [AUDIO
DUB.], set it to [AUDIO IN] or [MIC. IN] and press the MENU button.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE button on the wireless controller.
5. Press the AUDIO DUB. button on the wireless controller.
“AUDIO DUB.” and “ ” appear.
6. Press the PAUSE button on the wireless controller to begin
dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the microphone.
7. Press the STOP button on the wireless controller to stop dubbing.
Audio device: Stop playback.
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
MENU
(
71)
AUDIO SETUP AUDIO DUB.•••AUDIO IN
AUDIO
R
L
Signal flow
STV-250N Stereo Video Cable
(supplied)
Audio device
(e.g. CD player)