Canon 50 - Manual (Page 108)

108
Analog Line-in Recording
You can input video from other analog devices (VCR, TV or camcorder) via the S-video
terminal or AV terminal, and record the input video on the tape in the camcorder. You can
also record the input video as a movie or still image on a memory card.
Connecting
Refer also to the instruction manual of the connected device.
You can also connect via the S-video terminal ( 44).
Recording
1. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
2. Connected device: Load the recorded cassette.
3. Press the REC PAUSE button.
In record pause mode and during recording, you can check the picture on the screen.
4. Connected device: Play back the tape.
5. Press the / button when the scene you wish to record appears.
Recording starts.
6. Press the button to stop recording.
• Press the / button to pause recording.
• Press the / button again to restart recording.
7. Connected device: Stop playback.
Recording the Input Video on a Memory Card
The size of the still image recorded on the memory card will be 640 x 480. The still image
quality and the movie size can be selected.
1. Set the camcorder to PLAY (VCR) mode.
If a cassette is loaded, make sure that the tape is stopped.
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
AUDIO
VIDEO
R
L
Signal flow
STV-250N Stereo Video Cable
(supplied)