Canon 50 - Manual (Page 116)

116
Playing Back the Added Sound
You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust
the balance of both sounds.
1. Press the MENU button and select [AUDIO SETUP]. Select [12bit
AUDIO], select a setting and press the MENU button.
• STEREO1: Plays back the original sound.
• STEREO2: Plays back the added sound.
• MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.
• MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.
2. If you have selected [MIX/VARI.], adjust the mix level: Press the MENU
button and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the
balance with the SET dial and press the MENU button.
Turn the SET dial down to increase the volume of Stereo 1 and up to increase the
volume of Stereo 2.
The camcorder resets to [STEREO1] when you turn the camcorder off. However,
the mix balance is memorized by the camcorder.
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
MENU
(
71)
AUDIO SETUP 12bit AUDIO•••STEREO1