Canon 50 - Manual (Page 18)

18
Preparation Step 1: Preparing the Power Supply
The camcorder can be powered by a battery pack or connected to a household power
source. Charge the battery pack before use.
Attaching the Battery Pack
1. Turn the POWER switch to OFF.
2. Move the viewfinder upward.
3. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the
battery pack.
• Press lightly and slide it in the direction
of the arrow until it clicks.
To remove the battery pack:
1. Move the viewfinder upward.
2. Press the BATTERY RELEASE
button and slide the battery pack
upward.
Charging the Battery Pack
1. Connect the power cord to the
adapter.
2. Plug the power cord into a power
outlet.
3. Connect the power adapter to the
camcorder’s DC IN terminal.
The CHARGE indicator starts flashing. It
glows steadily when charging is complete.
To remove the power adapter:
1. Disconnect the power adapter
from the camcorder.
2. Unplug the power cord from the
power outlet.
3. Disconnect the power cord from the adapter.
BATTERY
RELEASE button
DC IN terminal CHARGE
indicator