Canon 50 - Manual (Page 110)

110
DV Dubbing
You can input video from other digital video devices via the DV terminal, and record the
input video on the tape in the camcorder. You can also record the input video as a movie
or still image on a memory card.
Connecting
Refer also to the instruction manual of the connected device.
Dubbing
1. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
If “AV DV” is displayed, change the setting ( 73).
2. Connected device: Load the recorded cassette.
3. Press the REC PAUSE button.
You can check the picture on the screen.
4. Connected Device: Play back the tape.
5. Press the / button when the scene you wish to record appears.
Recording starts.
6. Press the button to stop recording.
• Press the / button to pause recording.
• Press the / button again to restart recording.
7. Connected Device: Stop playback.
Recording the Input Video on a Memory Card
The size of the still image recorded on the memory card will be 640 x 480. The still image
quality and the movie size can be selected.
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette is loaded, make sure that the tape is stopped.
• If “AV
DV” is displayed, change the setting ( 73).
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
Signal flow
Commercially available DV cable
Digital video device
(e.g. camcorder)