Philips CCX092AT - Manual (Page 5)

Before Using theTV/VCR 5
Putting Batteries in the Remote Control
I
Remove the battery compartment lid on the bottom of
the remote control by sliding it in the direction of the
arrow.
2
Place two AA batteries inside the battery compartment
with their polarities (+ and - ends) aligned as indicated.
3
Replace the battery compartment lid.
1
2
3
Using the Remote Control
o Point the remote control at theTVA^CR’s remote sensor*
o Do not put objects between the remote control and the
TV/VCR.
TV/VCR Maintenance
о In this TV/VCR. use only tapes with the [VHS] mark,
о Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in theTV/VCR.
Removable labels like these ran jam theTV/VCR.
о Periodic maintenance is required to maintain yourTV/VCR’s con­
tinued excellent performance.This TV/VCR has an automatic
head cleaning system. However, the video heads will eventually
require cleaning or replacement. Cleaning or replacement of the
video heads should be performed by an authorized service cen­
ter.
Erase Protection
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
I
To prevent accidental erasure, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
I
2
Melpfiil Hints
The remote control and its batteries
are supplied.
Do not mix alkaline and man­
ganese batteries.
Do not mix old and new batteries.