Rerecording (tape duplication) 31 – Philips CCX092AT User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Rerecording (Tape Duplication) 31
Source Unit
(VCR or Camcorder)
AUDIO and
VIDEO OUT
Jacks
From AUDIO OUT to AUDIO
Q 0.0'o
AUDIO and
VIDEO Jacks
onTV/VCR
From VIDEO OUT to VIDEO
I
Make the connections shown above, using audio and video
cables.
2
The source unit (VCR or camcorder) will play your tape. Insert a
prerecorded tape in the source unit. If playback begins, press
the STOP button on the unit
3
The TV/VCR will record your tape. Insert a blank tape in the
TV/VCR. Make sure the tape’s record tab is intact The TV/VCR
will turn on automatically.
4
Point the remote control at the TV/VCR. Press Number
buttons 0,0 so that A/V IN appears on-screen.
5
Point the remote control at the TV/VCR. Press the (Tape)
SPEED button until the desired tape speed (SP, LP, or
SLP) appears on-screen.
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT button on the
TV/VCR, then stop the tape on the source unit (VCR or
camcorder).
Helpful Hints
To exit line input mode (A/V IN),
press the Number buttons or the
CHANNEL Up/Down buttons to
select a channel other than 00,
Unauthorized recording of copy
righted tefemion programs, video
tapes, or other materials may
injfringe on the rights of copyright
owners and violate copyright laws.
Different brands of equipment may
operate differently.
Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
Audio and video cables are not
included.