Philips CCX092AT - Manual (Page 29)

Recording 29
Read and follow the steps below to record a TV pro^m.
I
Place a tape with its record tab intact (see page five) in the
TV/VCR.The power will come on. Or, if the tape is already in the
TV/VCR, press the POWER button to turn on theTV/VCR.
2
Press the (Tape) SPEED button until the desired tape
speed appears on theTV/VCR screen, Deto//s about tape
speed are given below.
3
Use the CHANNEL Up/Down buttons or the Number
buttons to select the channel to be recorded, (Channels
cannot be changed during recording.)
4
Press the REC(ord)/OTR button once to start recording.
The REC(ord) light will glow.
e If there is not a tape in theTV/VCR, NO CASSETTE flashes on­
screen briefly.
® If the tape does not have a record tab, PROTECTED CASSETTE
/ CANNOT RECORD flashes on-screen briefly.TheTV/VCR will
eject the tape. Replace it with another tape.
5
To pause the recording (for example, during commer­
cials), press the PAUSE/STILL button. The REC(ord) light will
flash. To resume recording, press the PAUSE/STILL button
again or the REC(ord)/OTR button. The REC(ord) light will
glow.
6
To stop recording, press the STOP/V button.
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (TI60,TI20,andT60).There are diree playback
speeds: SR LP, and SLP. During playback, the TV/VCR selects the
tape speed automatically.When recording, you can change the
tape speed using the (Tape) SPEED button (see page 22).
Tape Speed Maximum Record/Play back Time
Type TI60 TI20 TéO
SP
(Standard Play)
2 hrs.
40 mins.
2 hrs. 1 hr.
LP
(Long Play) 5 hrs.
20 mins.
4 hrs. 2 hrs.
SLP
(Super Long Play)
8 hrs. 6 hrs. 3 hrs.
Helpful Hints
You cannot record one channel whf7e
watching another.
Recording options are on pages 30
-35.
You cannot record if the TV/VCR is
in Record Defeat mode (REC
DEFEATED will flash on-screen).
Details are on page 36.
If you pause a recording for more
than five minutes, the TV/VCR will
swkdi to Stop mode automatically
to protect the video cassette tape
from damage.
You can change the tape speed with
the (Tape) SPEED button while a
recording is in progress, but some
distortion may appeor on the tape.