Philips CCX092AT - Manual (Page 34)

8
.........................................................................
Press the Number 1 button to record in SP speed, press
the Number 2 button to record in LP speed, or press the
Number 3 button to record in SLP speed. Detai/s about tape
speed are on page 29. You cannot use the (Tape) SPEED button at
this time.
34 Timer Recording (contad)
ONETIME PROGRAM
PROGRAM I
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
SP=I LP=2 SLP=3
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
9
Press two Number buttons for the month and two
Number buttons for the day you want the program to
record. For example, for July 10, 1997, press 07,10.The day of
the week and the year will be displayed automatically (you cannot
program the TV/VCR to record more than one year in advance).
Pi
ONETIME PROGRAM
PROGRAM I
CHANNEL 10
TIME ON
09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
START DATE 07/10/97
THURSDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COM­
PLETED / PLEASETURN OFF FOR TIMER RECORDING will
appear on-screen.
• if there is not a tape in the TV/VCR, PLEASE INSERT CASSETTE
also appears on-screen.
• If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on-screen. If this happens,
insert a different tape.
• If PROGRAM NOT COMPLETED appears,start again at step I.
In five seconds die on-screen message will disappear.
11
Turn off the TV/VCR power. If you forget to turn off the
TVA/CR, PLEASETURN OFF FOR TIMER RECORDING appears
on the TV/VCR screen two minutes before a timer recording
starts.
The TV/VCR must be off for a timer
recording to take place!
Make sure there is a tape in the TV/VCR.
Helpful Hints
The RBC (ord) light may flash when
you turn off the TV/VCR at step 11
if a tape is not in the TV/VCR
PROGRAM NOT COMPLETED f
CLASH may appear on-screen v/hen
you finish setting a timer recording.
This means that the timer recording
you Just programmed and another
timer recording overlap, and thus
the current timer recording will not
be carried out
To stop a started timer recording,
press the STOP/EJECT button on
the TV/VCR
P/eose see page 48 for more
Helpful Hints,