Philips CCX092AT - Manual (Page 32)

32 Timer Recording
Follow the steps below to program the TV/VCR to record TV pro­
grams while you’re away from home.You can program up to eight
timer recordings. For each one,theTVA^CR will turn itself on,
record, and turn itself off automatically. Before you begin make
sure:
o The clock has been set. If not, CLOCK MUST BE SET appears,
o Channels are programmed.
o There is a tape in the TV/VCR (make sure the tape’s record tab
is intact and the tape is long enou^ to record the program).
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step 1.
I
Press the MENU button to display the pop up menu.
PRIM. SETUP
-VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
I PRESS + j
2
Press the PLAY/A button or the STOP/T button to select
VCR PROGRAM, then press the F.FWD/+ button.
VCR PROGRAM
1 ONCS
2 DAILY (MON - FRI)
3 WEEKLY
4 PROGRAM REVIEW
TO SELECT PRESS NUMBER
TO END PRESS EXIT
3
Select a once, daily or weekly recording.
o Press the Number 1 button to select ONCE. The TV/VCR will
record a TV program on any day you choose, up to 12 months
away.
0 Press the Number 2 button to select DAILY. The TV/VCR will
record from Monday through Friday - starting at the s^e time
and recording for the same length of time every day.
o Press the Number 3 button to select WEEKLY.The TV/VCR will
record on the same day, at the same time, and for the same
length of time every week.
Helpful Hints
If the power fails^ programmed
timer recordings will not be lost The
programmed timer recordings will
be restored when the clock is reset
after the power failure. (The clock
will reset itself OLftomatically if you
are using the AUTO CLOCK, feature.
Details are on pages 14- 17Af you
are not using the AUTO CLOCK fea­
ture, reset the clock manually; then,
the timer recordings will be restored.
Details are on pages 12 - l3.)The
timer recording will not occur only if
the timer recording was schedu/ed
to toke place during the power fail­
ure.
You cannot set a timer recording if
die TV/VCR is in Record Defeat
mode. 7b set the Record Defeat
mode to OFF, see page 36.