Philips CCX092AT User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
44 Real Time Counter Memory
Follow the steps below to reset the real time counter to zero at
a tape location you want to refer to later.
I
Play, fast forward or rewind a tape to the location that
you would like to refer to later. Stop the tape.
Press the STATUS/EXIT button. The real time counter will
appear on-screen.
1:08 PM
CHIO
SLP 1:23:45
STOP
3
While the counter remains on-screen, press the CLEAR
button to reset the real time counter to zero.
0
:
00:00
4
While the counter remains on-screen, press the MEMORY
button so that M appears on-screen. To erase a real time
counter memory, press the MEMORY button so that the M disap
pears from the screen.
M 0:00:00
5
To return to the previous point at which the real time
counter was reset to zero, when in Stop mode, press the
REW(ind)/- button.To return to the future point at which
the real time counter was reset to zero, when in Stop
mode, press the F.FWD/+ button. Wait for the tape to
stop, then press the PLAY/A button to watch the tape.
Helpful Hints
The real tíme counter memory will
not function during Repeat Play
mode. Details are on page 41.
You may only set one real time
counter memory at a time. If you
try to set the real time counter to
zero at a second location, the previ
ous real time counter to zero setting
will be lost