Futaba 6XHS - Manual (Page 61)

Aileron
Pitch
Front
Elevator
120
120
120
Use the reversing function (REV) as necessary to get the proper aileron, elevator, and pitch
operations.
Choosing the swashplate type
1. Press on the MODE buttons until SWSH appears on the menu.
2. Select the desired swashplate type by pressing the (+) or (–) keys. At
this time, the selected type will blink on and off.
3. Press the CURSOR key, and the word SET? appears blinking on and off in the display.
4. Press both the (+) and (–) DATA INPUT keys at the same time. A beep-beep sound indicates
that the selected type is now the active one.
Inputting AFR rate Values
5. Use the CURSOR key to select the channel (aileron, elevator or pitch) you
wish to change the AFR rate. The active channel number is indicated by
the arrow below. In the figure, AFR rate of SWSH2 type is being
programmed.
SWSH 2 SWSH 3 SWSH 3E
6. Choose the amount of AFR rate with the (+) or (–) keys. If you wish to return to the original
50% value, press both keys simultaneously.
7. Repeat this procedure for the AFR rate settings on the other channel remaining.
– 56 –