Futaba 6XHS User Manual
Page 6
Introduction to the 6XAs/6XHs Systems
TRANSMITTER
The versatile T6XAs/T6XHs
PCM1024 multi-function 6-channel
transmitter may be used with any Futaba
FM/PPM receiver! In addition, your system
will work with Futaba PCM1024 receivers
when you select the built-in PCM
transmission option. The liquid-crystal
display panel allows rapid data input into its
easy-to-read LCD display.
The T6XAs/T6XHs system comes
complete with programming for ACRO
(aircraft) and HELI (helicopter) mixing and
can accommodate virtually any model
configuration. The compact, ergonomically-
designed transmitter holds completely
independent memories for six different
models.
The T6XAs/T6XHs features a new
stick design which provides an improved
feel. The sticks’ length and tension may be
adjusted. Switches are provided for dual
rate (D/R), programmable mixers (PMX),
and other functions. For those learning to
fly, the transmitter has “buddy-box”
capability where a second transmitter may
be used by an experienced pilot as an
instructor. [The trainer cord is sold
separately.]
Standard programming features
include servo reversing for all channels,
ATV on all channels, dual rates,
exponential, and fail safe on all channels
(PCM transmission only). In addition, the
T6XAs/T6XHs features a number of handy
mixing features applicable to all types of
flying models. For aircraft, the extensive
preprogrammed mixing features include:
flaperon, V-tail, elevon, airbrake, elevator ->
flap, and flap -> elevator. Helicopter
features include hovering pitch and throttle,
revolution mixing, swashplate type
selection, and rudder offset. [Note: the
T6XAs/T6XHs may be used for sailplanes.
For these we recommend Futaba’s System 8,
which contains extensive sailplane
programming.]
Transmitter Specifications:
Operating system: 2-stick, 6 channels,
PCM1024 system
Modulation: FM/PPM or PCM, switchable
Power supply: 9.6V Ni-Cd battery
Current drain: 250mA
RECEIVER
The R127DF seven-channel receiver
included with your system is a compact
high-sensitivity narrow-band unit, providing
superior range and performance.
Receiver Specifications (FP-
R127DF)
Type: FM, Dual conversion
Intermediate frequencies: 455kHz, 10.7MHz
Power requirement: 4.8V or 6V Ni-Cd battery
Current drain: 14mA @ 4.8V
Size: 1.39x2.52x0.82” (35.3x64.0x20.8mm)
Weight: 1.5oz (42.5g)
Receiver Battery
4-cell NR-4J (NR-4RB for heli version)
Capacity: 500mAH (1,000mAH for NR-4RB)
Weight: 3.3oz/94g (3.9oz/111g for NR-4RB)
SERVO SPECIFICATIONS
Servo type: S3003 (Standard)
Control system: Pulse width control, 1.52ms
neutral
Power requirement: 4.8V (from receiver)
Output torque: 44.4oz-in (3.2kg-cm)
Operating speed: 0.23sec/60°
Size: 1.59x0.78x1.41” (40.4x19.8x36mm)
Weight: 1.3oz (37.2g)
*Specifications and ratings are subject to change without notice.
– 1 –