Futaba 6XHS - Manual (Page 12)

RECEIVER AND SERVO CONNECTIONS
Receiver output
channel
Aircraft
(ACRO)
Helicopter
(HELI)
1 Right aileron or
combined right flap + aileron * or
right elevon † (tailless)
Aileron
2 Elevator or
V-tail ‡ right side or
left elevon † (tailless)
Elevator
3 Throttle Throttle
4 Rudder
or
V-tail ‡ left side
Rudder
5 Landing Gear Gyro sensitivity
6 Flap or
combined Left flap + aileron *
Pitch
Multiple entries indicate that the servo function varies with the selected programming ( * =FLPR mode,
†
=ELVN mode,
‡
=VTAL mode). Outputs with no mixing functions are shown first.
The diagram below shows the default servo connections for a model using the ACRO
mode (only three or four servos are included in the T6XAs system). Two possible model
formats are shown on the ACRO contents page. Suggested helicopter connections are given
within the helicopter setup example.
– 7 –