Functions – Futaba 3VCS User Manual

Page 94

Functions

(Initial screen)

Use the

button to select the
menu screen.

Press the

button.

Use the

button to select the
function.

Press the

button.

Calling the setup screen

* When the direct call button is set,
the setup screen is also called by the
following method:

MENU SELECT

DIRECT SEL

Press the

and

button simulataneously.

Press the button set
at this function.

* Calling from menu screen

Use the

button to

select the setup item.

blinks at the current

setup item.

(Initial screen)

Setup items
1: Function assigned to button No. 1
2: Function assigned to button No. 2
3: Function assigned to button No. 3
4: Function assigned to button No. 4
5: Function assigned to button No. 5
6: Function assigned to button No. 6

Direct call function assignment

1 (Function assignment)

Use the (DN) or (UP) button to select the button
to be assigned and use the (+) or (-) button to
select the assigned function.

(Repeatedly set for buttons you want to assign at

item 1 above.)

2 When ending adjustment, return to the initial

screen by pressing the (END) button 3 times.

Direct call/DIRC-CALL

* 1~6 are buttons used at direct call.

You can directly call the "DIRECT CUSTOMIZE" screen by pressing the (UP) but-
ton and (DN) button at the same time for more than 3 seconds. In order to return to the
Initial screen, press (END) button once.