Futaba 3VCS - Manual (Page 93)

94
Functions
Direct call/DIRC-CALL
The function setup screen can be called from the menu screen or quickly called by
using this direct call method. Adjustment can be made quickly by setting frequently
used functions at direct call.
- Functions can be freely assigned to buttons 1~6 of the screen shown below.
- In the initial screen state, after the (UP) and (DN) buttons being pressed, the setup
screen is called by simply pressing the assigned button.
-Assignable functions (All functions)
INITIAL SETTING
Function
1. SUB-TRIM Subtrim
2. ST-EXP Steering EXP
3. MDL-SEL Model Serect
4. TH-EXP Throttle EXP
5. CHEPA Chanel End Point Adjuster
6. MDL-NAME Model Name
Direct call/DIRC-CALL
(Initial Screen) ( Direct Selection Screen) (Function Set-up Screen)
)
Push and buttons
simultaneously to call the
Direct Selection Screen.
Upon your needs, select one of the
6 functions and then click its button
to call the Function Set-up Screen.
Click button to return
to the Start Screen.
The upper screen
is an example of
setting Throttle
EPA function.