Futaba 3VCS - Manual (Page 24)

25
Before Using LCD Screen Contrast
The LCD screen contrast can be adjusted. (For more information, see page .)
Caution
Do not adjust the contrast so that the LCD is too bright or too dark.
When the display cannot be read due to a temperature change, data cannot be set.
LCD Screen Temperature Change
In the following cases, the LCD may become difficult to read due to a temperature
change.
- On hot summer days and cold winter days, the LCD may be easy to read indoors, but difficult to
read outdoors.
- If the contrast is too bright or too dark, temperature changes and lighting conditions may cause the
screen to become difficult to read.
Contrast adjustment when not called
1 Turn on the transmitter power again.
2 When the screen is too dark or too bright, adjust to a suitable contrast by pressing
the (-) or (+) button, respectively, while pressing the (SEL) button.
(+) buttons
(-) buttons
(SEL) button
Total timer
The total timer shows the accumulated time from last reset.
The total time does not change even when the model changes.
Reset method
1 In the initial screen state, hold down the (+) and (-) buttons simultaneously
for 1 second.
* The total timer display counts up from 1 minute to 99hours 59 minutes.
(+) buttons
(-) buttons