Throttle speed/th-speed (throttle system), Functions – Futaba 3VCS User Manual

Page 43

Functions

(Initial screen)

Use the

button to select the
menu screen.

Press the

button.

Use the

button to select the
function.

Press the

button.

Calling the setup screen

* When the direct call button is set,
the setup screen is also called by the
following method:

MENU SELECT

DIRECT SEL

Press the

and

button simulataneously.

Press the button set
at this function.

* Calling from menu screen

Use the

button to

select the setup item.

blinks at the current

setup item.

(Initial screen)

No TH-SPEED/Tires slip and vehicle does not move

TH-SPEED/Smooth, quick starts possible

* The LED blinks while the throttle
speed function is on.

* The black part of the bar graph is
the operation range.

* Throttle trigger position

* "L40" indicates operation below 40%.

Throttle speed/TH-SPEED (Throttle system)

Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Return to the initial value by pressing
the (+) and (-) buttons simultaneously
(approx. 1 sec).

Setup items
RA NGE : Operation range
SPEED

: Speed amount

MODE

: Function ON/OFF

Throttle speed/TH-SPEED (Throttle system)

Sudden trottle stick operation on a slippery road
only causes the wheels to spin and the vehicle can-
not accelerate smoothly. Setting the throttle speed
function reduces wasteful battery consumption
while at the same time permitting smooth, enjoy-
able operation.

Operation
Throttle servo (amp) operation is delayed so that the drive wheels will not spin even
if the trottle stick is operated more than necessary. This delay function is not per-
formed when the trottle stick is returned and at brake operation.
- Low side throttle speed (See [Operation range setup].)
Use when adjusting the speed from the neutral position to the set point.
- High side throttle speed (See [Operation range setup].)
Use when adjusting the high side speed from the set point.

Remark: Regarding the throttle speed set value; the actual delay value varies
depending on the system (HRS, PCM, PPM). The delay when the HRS system is used is approximately 1/
3 that of the PCM and PPM systems.

Operation display
The LED blinks while the throttle speed function is on.