Futaba 3VCS - Manual (Page 38)

39
Functions
Steering Speed (ST-SPEED) adjustment
(Preparation)
- Select setup item "TURN" and make the following ad-
justments:
1 "TURN" direction adjustment
Use the (+) or (-) buttons to adjust the delay
amount.
2 "RETN" direction adjustment
Press the (DN) button and select setup item
"RETN" and use the (+) or (-) buttons to adjust
the delay amount.
3 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
Setup item switching
- Use the (DN) or (UP) button to switch
the setup item.
100% 1%
Setting range
1~100%
At 100%, there is no delay.
At 1%, the delay is approximately 1.5
seconds.
Servo operation is delayed.
Steering Speed/ST-SPEED (Steering system)
Dial / Trim Setting
The steering speed adujustment (RATE) and (RETN) can be controlled with button
trim BT1, BT2 or digital trim DT3 etc. with the function select dial function. (See
page 80)