Flintec FDT-B - Manual (Page 4)

FLINTEC
Document Date Code Rev. Page
FDT – VERSION A/B – TECH. -REFERENCE MANUAL 05.04.99 FDT.RM 2 4 of 23
2. FRONT PANEL DESCRIPTION
1. WEIGHT
DISPLAY
6 digit LED for the display of measured weight (gross or net), and error messages.
Digit height approx. 14mm.
OVERARANGE is indicated by vvvvvv vvvvvv vvvvvv vvvvvv
UNDER-RANGE is indicated by uuuuuu uuuuuu uuuuuu uuuuuu
Scale not level will be indicated by E t i l t
2. NET INDICATOR
If lights up when the scale has been tared and the display is in NET mode.
3. TARE INDICATOR
It indicates that a tare value is being displayed.
4. NO MOTION INDICATOR
It lights up when the scale is stable.
5. CENTER OF ZERO INDICATOR
It lights up when the scale weight is stable and within 1/4 division of actual zero.
6. SCALE A INDICATOR
In ‘dual scale mode’ it indicates the weight from scale A is displayed.
ON = Scale A is displayed OFF = Scale B is displayed
7. SCALE B INDICATOR
In ‘dual scale mode’ it indicates the weight from scale B is displayed.
ON = Scale B is displayed OFF = Scale A is displayed
When both scale A & B LEDs are illuminated the sum of the weight A+B is displayed.