FingerTec TA500 Manual - Manual (Page 8)

9
Cleaning Terminal
ClEANINg ThE BOdy
Use a dry cloth to clean the terminal’s body. Do not use any liquids, household cleaners,
aerosol spray, solvents, alcohol, ammonia and abrasive solutions to clean the body of
the terminal because it could damage it.
ClEANINg ThE FINgErprINT prIsM
Clean the fingerprint prism with a cellophane tape for silicon coated prism.
View the video on how to clean the fingerprint prism at this link:
http://www.fingertec.com/newsletter/enduser/cleanfinger.html.
For the non-coated prism, please use microfiber cloth.
Restarting and Resetting Terminal
If a feature isn’t functioning as it should, try restarting or resetting the terminals
rEsTArTINg ThE TErMINAl
Push the On/Off button on the terminal to restart the terminal. If you can’t restart the
terminal, or if the problem persists, you might want to reset.
rEsETTINg ThE TErMINAl
Go to Menu, press the System icon and select Reset Opts. Click OK to Reset the termi-
nal. Resetting the terminal will cause all your settings to return to the original factory
settings.