FingerTec TA500 Manual - Manual (Page 16)

17
5 • SYSTEM
System Settings
ThrEshOld
Threshold is the level of the fingerprint scanner’s sensitivity. Threshold determines how
many percent of minutiae points on a fingerprint template will be read by the system.
The higher the threshold level, more points are being read, more restricted the system.
Configure the threshold for 1:1 and 1:N methods.
For 1:1, the range is from 0-50 and the recommended value is 15.
For 1:N, the range is from 0-50 and the recommended value is 5.
Press Menu > System > System > Threshold (1:1) or Threshold (1:N) > Determine the
Level > OK to Save
dATE FOrMAT
The date format can differ based on countries for example in Malaysia, the date-month-
year format is used while in America, the month comes first. Choose your date format
according to your preference. The default format is dd-mm-yy. Press Menu > System >
System > Date Format > Select Format > OK to save.
sOUNd OF KEyBOArd
The terminal emits sound when you press any of its buttons.
To turn on/off the keypad sound: Press Menu > System > System > Key Voice > On/Off
> OK to save.
FINgEr sENsITIVITy
Determine the sensitivity of the sensor to fingerprint. Choose Low, Mid or High sensi-
tivity. It is recommended to be set at Mid. Press Menu > System > System > Sensitivity
> Select your preference > OK to save.
VOICE
The terminal has certain voice commands to guide users during enrolment and to no-
tify users during verification. Press Menu > System > System > Voice Prompts > On/Off
> OK to save.
VOlUME (%)
Voice Control lets you control the volume level emitted by the terminal. To adjust the
volume of the terminal, press Menu > System > System > Select your preference > OK
to save.
rETry pErIOd
Once you have inserted a value, eg: 1, when a user checks in at 10:01, his time will be
automatically adjusted to 10:00. The maximum value is 99. When you enter 5, a user
given 5 minutes leeway time in his attendance.