Power on/off button, Battery, Date/time – FingerTec TA500 Manual User Manual
Page 7: Voice control, Security features
8
Power On/Off Button
Use the power on/off button to turn the terminal on or off. You can disable the button
to avoid accidental shut off of the terminal.
Battery
FingerTec terminals operate using power supply from a standard power outlet. Inside
each terminal, there is an RTC battery to keep the clock of the terminal running. When
there is a serious delay in time or the clock of the terminal reverts to 00:00 after restart-
ing, this indicates that the RTC needs to be replaced.
External power supply:
Mini UPS (uninterrupted power supply) 12V provides mobile
power supply to the terminals. Charge the mini UPS sufficiently for optimum perform-
ance. Refer to
http://accessory.fingertec.com
for more information about accesso-
ries.
Date/Time
The terminal display the date and time at the home screen. Choose the data and time
format based on your preference. Press Menu > System > Date/Time > Select Value >
OK to save.
Voice Control
Voice Control lets you control the level of volume emitted by the terminal.
TUrN ON/OFF
The system lets you to turn on/off the voice based on you preference. Press Menu >
System > System > Voice Prompts > On/Off.
Security Features
Security features help protect the information in the terminal from being accessed by
unauthorized individuals.
AdMIN AFFIrM
Register an administrator to the system by enrolling a fingerprint or a password to a
user ID. Press Menu > New User > Role > Administrator > Choose Enrollment method
> OK to Save. After enrolling an administrator, the main menu can only be accessed
by the administrator. The terminal will display “Admin Affirm” when an unauthorized
individual tries to access the Menu.
COM KEy
Create password for a specific terminal here. Press Menu > Comm. > Password > In-
sert Password > OK to save. The security password known as COM Key is intended for
extra security. To connect the terminal with the software, the COM key inserted in the
Software must be the same as the one inserted in the terminal or else the connection
will not be established even though the activation key and product key are correctly
inserted.