FingerTec Q2 - Manual (Page 37)

36
Duress Options 5
Duress FP
Help Key N
4 1:1 TrIg Y
Duress Options 5
Duress FP N
1:1 TrIg N
4 1:N TrIg Y
Duress Options 5
1:1 TrIg N
1:N TrIg N
4 Pwd TrIg Y
Duress Options 5
1:1 TrIg N
Pwd TrIg N
4 Alam Delay 10
Trigger Method
There are 3 types of trigger method, which are:
1:1 Trigger To trigger alarm by using 1:1 fingerprint verification. Use 1:N matching or password
verification during normal operation to avoid conflict.
1:N Trigger To trigger alarm by using 1:N fingerprint verification. Use 1:1 matching or password
verification during normal operation to avoid conflict.
Password Trigger To trigger alarm by using password verification. Use fingerprint verification during nor-
mal operation to avoid conflict.
You may choose only one method or all methods.
Alarm Delay
The timer could be configured to set off the alarm after successful verification on fingerprint. The
time range is from 0 to 255 seconds.
Q2 models are provided with output for alarm system. Two types of signal
could be used:
• NO (Normally Open)
• NC (Normally Close)
Consult your installer for more details.