FingerTec Q2 - Manual (Page 23)

22
Verifi cation With RFID Card In
Q2 Model
RFID card user can do verifications at Q2
model by using the following combinations:
• RFID card only
• RFID card with fingerprint
• RFID card with password
RFID Card Only
To enable this operation, configure option
“Card Only” in Advance Option to “Yes”.
When you see this | Do this
Welcome Check-In
08:24
07-01-08 Mon
Verify PIN Card
CARD : 9067337
User ID : 00001
Verifi ed
Verify PIN Card
No Enroll
Place RFID card at the induc-
tion area.
The Card ID and the User ID
will be prompted and you will
hear “Thank You”.
If verification is failed, the
screen will show “No Enroll”
and you will hear “Invalid ID”.
Card & Fingerprint
To enable this operation, configure option
“Card Only” in Advance Option to “No”.
When you see this | Do this
1:1 FP Match
CARD : 9067337
ESC OK (Pwd)
1:1 FP Match
CARD : 9067337
User ID : 00001
Verifi ed
1:1 FP Match
CARD : 9067337
Please try again
Place card at the induction
area. Card ID will be displayed.
Place finger on the scanner to
capture the fingerprint.
User ID will be prompted and
you will hear “Thank You”
If verification is failed, you will
hear “Please Try Again”.