FingerTec Q2 - Manual (Page 35)

34
Access Options 5
DSen Delay 10
4 DSen Mode NC
DSen
Alarm
Access Options 5
4 DSen Delay 10
DSen
Mode NC
DSen Alarm
Access Options
5
DSen Delay 10
DSen Mode NC
4 DSen Alarm
User of serial number 00002:
The user belongs to Group 2, he does not belong to any Group Time Zone but his effective time
zones are 1 and 20.
When he wants to use group time zone, select “Yes”. In user time zone, serial number of group
time zone will be automatically assigned the value if serial number of group time zone. In contrary,
if a user wants to use user time zone, just directly modify the serial number in user time zone and
use group time zone will automatically change to “No”.
ACCESS COMB
In order to allow user to use different time zone groups, please set the followings accordingly:
• Comb1 value set to 1
• Comb4 value set to 4
• Comb2 value set to 2 • Comb5 value set to 5
• Comb3 value set to 3
DSEN. DELAY
(Door sensor delay)
DSen. Delay can be configured to alert users if a door is not closing well
after a time period and the input is in second format. Door sensor must
be installed prior to activation of this option.
DSEN. MODE
(Door sensor mode)
DSen Mode to configure the time for internal buzzer to alert user if door
is not closing well. You must install door sensor to activate this option.
DSEN. ALARM
(Door sensor alarm)
DSen. Alarm can be configured to alert users if a door is not closing well
after a time period.