EVCO c-pro CLIMA sistema - Manual (Page 8)

C-PRO CLIMA SISTEMA USER MANUAL
Page 8
1.7 Functioning in “Manual” or “Time Period” mode
Manual Functioning Mode
Whenever management of the time periods is not enabled by the user, the system works in
MANUAL mode (indicated by MAN on the zone page).
By default the system loads the ECONOMY work set-point (both winter and summer), keeping the
work set-point unaltered through time. unless the user must change the manual set-point.
Functioning in Time Period mode
The c-pro CLIMA system gives the final user the possibility to set a weekly automatic time periods
system, independently for each zone.
Enabling Time periods
To enable the weekly time periods system, it is necessary to go to the “Menu fasce orarie” (Time
periods menu) from the Zone Page using the LEFT or RIGHT keys and take the "Abilita" (Enable)
parameter to YES.
Once the time periods management is enabled, the system automatically goes into the following
state:
WINTER:
ANTI-FREEZE (with system standard safety value set by the system installer).
SUMMER: OFF