EVCO c-pro CLIMA sistema - Manual (Page 6)

C-PRO CLIMA SISTEMA USER MANUAL
Page 6
1.4 System page
Screen 4
The “system page” (screen 4), as well as giving the possibility to navigate between the various zone
regulators present in the system, will supply some main information regarding the controlled system
and on the status of the zone regulators connected to it.
At the side of every zone regulator (indicated with ZN1, ZN2… ZN8) in fact one of the following
codes will appear:
*
= zone regulator not present,
? = zone regulator enabled but offline (contact service),
A = zone regulator enabled, on-line, in alarm status (contact service),
! = zone regulator present but disabled,
= = zone regulator enabled, on-line, with no
heating/cooling request coming from controlled zones.
+ = zone regulator enabled, on-line, with
heating/cooling request coming from controlled zones.
1.5 Maintenance page
Whenever maintenance operations are in progress in the system, all Vgraph displays installed will
show the maintenance page stated below:
During this display all setting/display procedures via Vgraph are prohibited.
Once maintenance has bee completed, the zone terminal will automatically go back to the Pre-
selection page envisioned by installation.