EVCO c-pro CLIMA sistema - Manual (Page 10)

C-PRO CLIMA SISTEMA USER MANUAL
Page 10
1.8 Set-point menu
The c-pro CLIMA system gives the final user the possibility to set all weekly automatic time
periods work set-points independently for each zone in a simple and intuitive way via a unique user
screen.
To set the work set-points of the time periods it is necessary to go to the "Menu setpoint” (Set-point
menu) from the Zone page using the LEFT or RIGHT navigation keys. The following screen will
appear:
To set the set-point just position the cursor on the value to be edited and press ENTER.
Use the UP and DOWN keys to set the desired value and then confirm again using the ENTER key.
The set-points that can be set by the user are:
Economy set-point [W]:
Winter Economy period work set-point
Comfort set-point [W]: Winter Comfort period work set-point
Economy set-point [S]: Summer Economy period work set-point
Comfort set-point [S]: Winter Comfort period work set-point
Humid. ECO [S+W]: Economy time period work set-point (Summer + Winter, with
regulation active only in Summer mode)
Humid. COM [S+W]: Comfort time period work set-point (Summer + Winter, with
regulation active only in Summer mode)
1.9 Alarms
Whenever during the display of the Zone Page Vgraph shows the flashing ALARM icon, it means
that one of the following alarms blocking the system is in progress:
- MCCT thermal power plant regulator off-line
- Outlet line circulation pump block
- Chiller/heat pump block
- Boiler block
Call the after-sales service immediately to request system maintenance.