7 functioning in “manual” or “time period” mode – EVCO EPH4DXP1CT User manual User Manual
Page 8
Evco S.p.A.
c-pro 3 CLIMA sistema
| User manual ver.1.0 | Code 115CP3CSE104
page 8 of 14
1.7
Functioning in “Manual” or “Time Period” mode
Manual Functioning Mode
Whenever management of the time periods is not enabled by the user, the system works in MANUAL mode (indicated
by MAN on the zone page).
By default the system loads the ECONOMY work set-point (both winter and summer), keeping the work set-point
unaltered through time. unless the user must change the manual set-point.
Functioning in Time Period mode
The c-pro 3 CLIMA sistema gives the final user the possibility to set a weekly automatic time periods system,
independently for each zone.
Enabling Time periods
To enable the weekly time periods system, it is necessary to go to the “Menu fasce orarie” (Time periods menu) from
the Zone Page using the LEFT or RIGHT keys and take the "Abilita" (Enable) parameter to YES.
Once the time periods management is enabled, the system automatically goes into the following state:
WINTER:
ANTI-FREEZE (with system standard safety value set by the system installer).
SUMMER:
OFF