EVCO EPH4DXP1CT User manual - Manual (Page 6)

Evco S.p.A. c-pro 3 CLIMA sistema | User manual ver.1.0 | Code 115CP3CSE104
page 6 of 14
1.4 System page
Screen 4
The “system page” (screen 4), as well as giving the possibility to navigate between the various zone regulators
present in the system, will supply some main information regarding the controlled system and on the status of the
zone regulators connected to it.
At the side of every zone regulator (indicated with ZN1, ZN2… ZN8) in fact one of the following codes will appear:
* = zone regulator not present,
? = zone regulator enabled but offline (contact service),
A = zone regulator enabled, on-line, in alarm status (contact service),
! = zone regulator present but disabled,
= = zone regulator enabled, on-line, with no
heating/cooling request coming from controlled zones.
+ = zone regulator enabled, on-line, with
heating/cooling request coming from controlled zones.
1.5 Maintenance page
Whenever maintenance operations are in progress in the system, all Vroom displays installed will show the
maintenance page stated below:
During this display all setting/display procedures via Vroom are prohibited.
Once maintenance has bee completed, the zone terminal will automatically go back to the Pre-selection page
envisioned by installation.