EVCO EPH4DXP1CT User manual - Manual (Page 7)

Evco S.p.A. c-pro 3 CLIMA sistema | User manual ver.1.0 | Code 115CP3CSE104
page 7 of 14
1.6 Zone Page
The “zone page” is the Vroom main screen, i.e. the standard display pages on which Vroom will stop during operator
inactivity periods.
This screen allows to display:
- Name of the Zone displayed
- Temperature and Humidity (if enabled) of the Zone displayed,
- External temperature (if enabled),
- Date and real time
- Time period in progress for the Zone displayed
- System work mode (summer/winter)
- Presence of alarms blocking the system (see paragraph 1.8).
It also allows to modify:
- Work set-point in progress.
Taking the cursor onto the “Set” label and pressing ENTER, sit will be possible to edit the set-point value in
progress using the UP and DOWN keys. Once the desired temperature has been set, press ENTER to confirm
the new value.
The work set-point modification is only temporary. On successive loading of the time period in progress, the
set-point value established of the relevant set-point menu will be loaded (paragraph 1.7)
By pressing ESC on the “Zone Page”, the zone terminal will go back to the pre-selection page configured for the
system (see paragraph 1.3).
Time period in progress
Zone temperature and humidity
Set-point of the time period in progress
External temperature
Name of the zone displayed
Date and time
Alarm in progress (flashing)
Summer/Winter (mode in progress)