EVCO EK356AJ7 - Manual (Page 2)

To select a parameter:
• press or
To modify the value of the parameter:
• press and or
To gain access the second level:
• gain access the first level
• press or to select
• press and or to select “ -19 “
• press and for 4 s : the instrument
will show
To quit the procedure:
• press and for 4 s or do not op-
erate for about 60 s.
7 SIGNALS
7.1 Signals
LED
° C
° F
h
MEANING
LED top
if it is lit, the top output will be turned ON
LED floor
if it is lit, the floor output will be turned ON
LED steam generator
if it is lit, the steam generator will be turned ON
LED steam injector
if it is lit, the steam injection will be running
LED extractor
if it is lit, the extractor will be turned ON
LED economy
if it is lit, function Economy will be activated
LED chamber light
if it is lit, the chamber light will be lit
LED Celsius degree
if it is lit, the unit of measure of the temperature showed by the instru-
ment will be Celsius degree
LED Fahrenheit degree
if it is lit, the unit of measure of the temperature showed by the instru-
ment will be Fahrenheit degree
LED hour
if it is lit, the unit of measure of the time showed by the instrument will
be hour
(1) you can set the timer for delayed starting between 1 and 99 h
(2) the instrument stores the course of the time every 30 min
(3) the first time the instrument stores the course of the value (after a lack of power
supply) will take place after 15 min the power supply has recovered, in order to
ensure the course storing even if the lacks take place over and over again.
4 COOKING TIMER
4.1 How to set the cooking timer
To modify the cooking timer:
• be sure the instrument is turned ON
• press
• press or within 4 s (4)
• press
To activate/deactivate the timer:
• be sure the instrument is turned ON
• press for 2 s
As soon as the time you have set with the procedure passes, the
buzzer will be activated for the time you have set with param-
eter c4.
(4) you can set the cooking timer between 1 and 99 min.
5 WORKING SETPOINT
5.1 How to set the top setpoint
• press
• press or within 4 s (5)
• press
(5) you can set the top setpoint between the limits you have set with parameters rA1
and rA2.
5.2 How to set the floor setpoint
• press
• press or within 4 s (6)
• press
(6) you can set the top setpoint between the limits you have set with parameters rA1
and rA2.
6 CONFIGURATION PARAMETERS
6.1 How to set configuration parameters
Configuration parameters are arranged on two levels.
To gain access the first level:
• press and for 4 s : the instrument
will show
11 ELECTRICAL CONNECTION
11.1 Electrical connection
(10) provide the probe with a protection able to protect it against contacts with metal parts or use insulated probes.